전체상품목록 바로가기

본문 바로가기


| TLR 8IGHT 4.0 버기 + Xerun XR8-Plus 모터 변속기 세트 품절

(해외배송 가능상품)
 엑스캅터 도매상품 - B2B 결제 는 무통장입금, 현금결제를 기준으로 합니다.
기본 정보
상품명 TLR 8IGHT 4.0 버기 + Xerun XR8-Plus 모터 변속기 세트
판매가 1,015,000원 재입고 알림 SMS
적립금 10,150원 (1%)
배송비 3,500원 (50,000원 이상 구매 시 무료)
제조사 TLR
구매수량 수량증가수량감소
원산지 중국
코드명 P000BDFY
제품지원 TLR 에이트 2.0 매뉴얼

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

결제안내
현금결제  |  세금계산서 발행  |  도서산간 배송비 추가
배송비
무료 ~ 3,000원 (30만원 이상 무료)  |  도서산간 배송비 추가
상품 옵션
옵션 선택
상품 목록
상품명 상품수 가격
TLR 8IGHT 4.0 버기 + Xerun XR8-Plus 모터 변속기 세트   수량증가 수량감소 1015000
총 합계금액 (수량)
0 (0개)
바로구매하기예약주문 장바구니 담기 SOLD OUT 관심상품등록

안녕하세요,

신형 에이트전동 4.0 이 드디여 출시되였습니다.새로셀계된 샤시,드라이브트레인,서스팬션,쇽구조,캐스터 블록,쇽타워등 업그레이드된 4.0버전은 웰드챈피언 플랫폼 3.0뒤를 이어 하이엔드급 1/8전동버기의 전설을 이어갑니다.3.0보다 휠신 경기중 퍼포먼스방면에서 우수한 성적이 기대됩니다.일단 신형에이트4.0버기차량은 한국시장은 용산알씨및 협력회사에서 구매가능합니다.환율이 많이 올랐지만 최대한 소비자들이 최고급 1/8 전동버기차량을 즐길수있도록 소비자가격은 71만3천원으로 책정되였습니다.

TLR 8ight-E 4.0 전동버기는 3.0 전동버전과 호환되는 부품도 엄청많고 엔진 4.0버전과도 호환되는 부품이 많기에 부품수급은 근심안하셔도 됩니다.

*본 제품은 중급자 이상을 대상으로 하는 조립식 KIT 이며, 주행에 필요한 모든 기자재(송수신기, 서보, 배터리, 충전기, 타이어 등)를 전부 별도로 구매하셔야 하고, 조립 및 도색, 셋팅이 필요한 제품입니다.

모터&변속기세트는 전부 코킹현상이 가장 낮은 센서드방식입니다.

모터:1900KV 센서드방식

변속기:XR8-PLUS 150A 센서드 변속기 





Team Losi Racing just released a brand new TLR 8ight-E 4.0 electric buggy. The kit includes the best updates which are also available on the new 4.0 nitro kit such as bleeder caps, booted drive shafts and dogbones, adjustable spindle height and so on. The major improvement? Variable engine positioning and different battery positions!

Refinements

Variable Motor and center differential angles:
Two different center plates for the bottom of the chassis are included. The stock center plate puts the motor and differential directly in line with the chassis. The optional center plate rotates the motor and differential 4.4 degrees, creating equal angles between the front-center and rear-center dog bones. This provides more balanced power to the front and rear of the car under acceleration.

Variable battery and ESC locations:
The chassis offers two locations for the battery and ESC. With the battery in the forward location and the ESC in the rear of the car, the vehicle has more forward weight bias which improves stability on high-speed tracks. Moving the ESC forward and the battery to the rear mounting location provides a rear weight bias that increases corner speed and makes handling more agile.

Larger bearings in spindles:
Front spindles and rear hubs have been revised to accept a larger 8 x 16 x 5 outer bearing for increased durability. This is the same refinement as in the 4.0 nitro version.

<팀로시社에서 발표된 동영상 >

Adjustable Caster blocks:
The adjustable, 15-degree caster blocks make it possible to tune dog bone plunge by changing the height of the spindle. This is the same refinement as in the 4.0 nitro version.

Shocks now included bleeder caps:
The new bleeder shock caps and internal seals allow for easier rebuilds while using an emulsion shock setup. New bushings that press into the shock cap further improve durability. This is the same refinement as in the 4.0 nitro version.

Booted drive shafts:
Molded rubber boots on the CVA s increase U- joint life by holding lubrication in and keeping dirt out. This is the same refinement as in the 4.0 nitro version.

Wider Chassis:
Just like the nitro version the 4.0 has now a wider chassis. This because of the variable positioning of the differential and engine. But it gives the car also more stability which improves the overall handling.

Body:
Now the kits includes the very popular Cab Forward body which was an upgrade body in the 3.0 kit. Be Aware, since the chassis is wider compared with the 3.0 you old bodies doesn't fit on the 4.0. The scheme on the commercial pictures is from TLR Driver Philip Atondo. But of course the kit includes a transparant body so you are able to paint your body by your own wishes.

Differential repositioning

As said this new electric buggy allows you to reposition the differential. Since the motor is fixed on the diff mounts this will rotates to and this is why the chassis is wider than the previous 3.0. The possibility to rotate the diff is pretty awesome and is designed to vary the dogbone angle.

The angle of the differential can be 0° or 4.4°. With 0° the drivetrain gets the same angle as on the 3.0 and has the negative that the power generated by the engine isn't separated equally between the front and rear side of the buggy. This because the rear driveshaft has a less angle than the front and made it easier to transfer the power to the rear side.

Next video shows you the different angles and movement of the differential, motor and driveshafts.



When replacing the bottom plate insert you are able to set the differential into a 4.4° angle. When doing this both of the driveshafts are getting the same angle so there is a much equal amount of power transferred through the car. This better balance is given you a better 4WD experience. We have already experienced this on the 4.0 nitro buggy and it is really given you a better handling of the car. On the other side the 0° position is given the car more steering so when you are driving a track with narrow corners you probably want this position.



Image gallery




































자유결제

맨위로


WORLD SHIPPING

PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :

GO
close